Quick answer
Why does my dryer run but the drum not spin?
If the motor hums or runs but the drum stays still, the drum belt has usually broken or slipped off its idler pulley. Worn rollers or a seized idler pulley cause squealing and thumping, and replacing them is a common repair.
Three problems often show up together on a dryer: it won’t start, it starts but the drum doesn’t turn, or it turns with a squeal, thump or grinding noise. They share many of the same parts, so this guide covers all three. Start with the simple checks before you open anything.
Safety First
Always unplug the dryer or switch off its breaker before removing panels or touching the drum, belt or motor. Wait for the dryer to cool if it was just running.
Part 1: Dryer Won’t Start
Check the power
- Is the dryer plugged in firmly? Plugs can loosen when the dryer is moved.
- Check the breaker. Switch the double-pole dryer breaker fully off, then on.
- Does the display light up? If it’s completely dark, the problem is power, a fuse or the control.
Check the door
Dryers won’t start if the door switch doesn’t detect a closed door. Close the door firmly and listen for a click. Look for a broken latch or a bent strike. Samsung dryers may show dE, dC or dF for a door problem.
Child lock and start button
Many dryers have a control lock. Look for a lock icon and check your manual for how to turn it off (often by holding one or two buttons for a few seconds). On some models you have to press and hold Start for a moment.
Thermal fuse
On many dryers, a blown thermal fuse stops the dryer from starting at all, not just from heating. A fuse usually blows because of overheating from a blocked vent. If the dryer died after a long run of slow drying, suspect this, and plan to clean the vent too.
Part 2: Dryer Runs but the Drum Doesn’t Spin
If you hear the motor humming or running but the drum stays still, the most common cause is a broken drive belt. The belt wraps around the drum and the motor pulley. When it snaps, the motor spins freely and the drum doesn’t move.
A quick test: with the dryer unplugged, open the door and turn the drum by hand. If it turns very easily with no resistance, the belt is likely broken. A healthy belt gives noticeable resistance.
Other causes:
- Idler pulley failure. The idler keeps tension on the belt. If it seizes or breaks, the belt slips or comes off.
- Seized drum rollers or bearing. If the drum is very hard to turn by hand, something is binding.
- Motor problem. If you hear a hum but nothing turns, even with a good belt, the motor may be failing.
- Overloading. A very heavy, wet load can stall some dryers or make the belt slip.
Part 3: Dryer Making Noise
| Noise | Common cause |
|---|---|
| Squealing or squeaking | Worn idler pulley, drum rollers, or drum glides |
| Thumping | Worn or flat-spotted drum rollers; sometimes a stretched belt |
| Scraping or grinding | Worn drum glides or felt seal; an object caught at the drum edge |
| Rattling or clicking | Coins, buttons, zippers, or something stuck in the drum or blower |
| Loud roaring | Blower wheel damage or worn bearings |
What you can check
- Empty pockets and the drum. Coins and hair clips cause many rattling sounds. Feel around the drum’s edges and look in the lint screen housing.
- Level the dryer. A dryer that rocks can thump and vibrate. Adjust the feet so it sits level and steady.
- Check what’s being dried. Sneakers and heavy items will thump. Use a drying rack if your dryer has one.
- Listen for when the noise happens. At startup only? Constantly? It helps a technician narrow it down.
Squeals and thumps usually get worse, not better. Worn rollers and idler pulleys can eventually cause the belt to break, so it pays to deal with them early.
Can I Replace a Dryer Belt Myself?
On some dryers, a belt replacement is a manageable DIY job if you’re comfortable removing panels. On others, it involves taking off the front panel, supporting the drum, and routing the belt around the idler and motor in a specific pattern. If the belt broke because of a seized roller or idler, replacing only the belt won’t last. Many people prefer to have the rollers, idler and belt checked together.
If your dryer runs and spins but takes too long, read our guide on a dryer not drying clothes.
When to Call a Pro
Call a technician if the drum won’t turn, you hear grinding or loud roaring, the dryer hums without starting, or it stopped working after a period of overheating. A technician can replace belts, idler pulleys, rollers, door switches and thermal fuses, and check the vent so the problem doesn’t repeat.
We repair dryers from Whirlpool, Samsung, LG, Maytag, Kenmore, GE, Frigidaire and more. See our dryer repair service.
Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call is waived when you go ahead with the repair, and our repairs carry a 3 to 6 month warranty depending on the job. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our 350+ Google reviews.
Frequently Asked Questions
Why does my dryer run but the drum not spin?
The most common cause is a broken drive belt. A failed idler pulley, seized drum rollers, or a failing motor can also stop the drum from turning.
Why won’t my dryer start when I press the button?
Check the plug and breaker, make sure the door is closed firmly, and turn off any control lock. On many dryers, a blown thermal fuse also prevents starting.
What causes a dryer to squeal?
Squealing usually comes from a worn idler pulley, drum rollers or drum glides. It tends to get worse over time and can lead to a broken belt.
Is a thumping dryer dangerous?
Thumping is usually from worn rollers or heavy items like shoes. It isn’t an immediate hazard, but have worn rollers replaced before they damage the belt or drum.