Quick answer
Why is my fridge light on but it's not cooling?
Some fridges have a demo or showroom mode that turns off cooling while the lights and display still work, such as OF OF on Samsung. Other brands show codes that point to a fan or sensor, so check the display before calling.
Our general fridge not cooling guide covers checks that apply to every refrigerator: settings, door seals, condenser coils, fans and frost. But different brands have their own quirks. Some have a demo or showroom mode that turns off cooling while the lights stay on. Many show error codes that point to a specific fan or sensor. This guide goes brand by brand.
Codes and button combinations vary by model, so always confirm in your owner’s manual. Where we say a code “commonly indicates” something, treat it as a starting point for diagnosis.
Safety First
Unplug the fridge or switch off its breaker before removing panels, cleaning coils, or doing a manual defrost. A power reset (unplug for a few minutes) is safe for most models, but don’t repeatedly cycle power in quick succession.
Samsung
Demo mode: “OF OF” or “O FF”
If the display shows OF OF (or similar) and the fridge isn’t cooling, it’s likely in demo (showroom) mode. On many models, you exit by pressing and holding the top two buttons on the left of the display, together, for about 5–8 seconds until a chime sounds. Button combinations vary, so check your manual.
Common Samsung fridge codes
| Code | Commonly indicates |
|---|---|
| 22E / 22C | Fridge fan error, often from ice around the fan |
| 21E / 21C | Freezer fan error |
| 5E / 5C | Fridge defrost sensor fault |
Fan codes on Samsung fridges are often caused by ice. A full manual defrost (unplug for a few hours or longer, doors open, towels down) can clear the ice. If the code returns, the defrost system needs testing.
See our Samsung appliance repair page.
LG
LG fridges display “Er” followed by a two-letter code.
| Code | Commonly indicates |
|---|---|
| Er FF | Freezer fan problem, often from ice |
| Er IF | Ice maker fan problem |
| Er CF | Condenser fan problem |
| Er dH | Defrost heater problem |
| Er rS | Fridge sensor fault |
| Er gF | Water flow sensor issue |
For Er CF, check that the condenser area at the bottom back is clean and the fan isn’t blocked. For Er FF and Er IF, ice is a frequent cause; a manual defrost may help temporarily. LG fridges also have a display demo mode on some models; your manual lists how to exit it.
See our LG appliance repair page.
Frigidaire and Electrolux
| Code | Commonly indicates |
|---|---|
| PF | Power failure (an outage occurred); press the alarm or reset button |
| H or HI | Temperature in the compartment is too high |
| SY EF | Evaporator fan issue on some models |
| SY CE / SY CF | Communication fault between boards |
A PF or H alert after a power outage isn’t necessarily a fault; clear it and monitor the temperature. If H persists after 24 hours, work through the general checks. Some Frigidaire and Electrolux models also have a showroom mode; check the manual for the exit combination.
See our Frigidaire and Electrolux repair pages.
Whirlpool, KitchenAid, Maytag and Inglis
These brands come from the same manufacturer and share many features.
- PO on the display commonly indicates a power outage occurred. Press the indicated button to clear it, then check food temperatures.
- Many models have a cooling off or showroom mode, where lights and display work but there’s no cooling. The exit method varies by model; look for “cooling off” or “showroom” in the manual.
- Bottom-mount models often have coils underneath with a condenser fan. Dirty coils are a common cause of poor cooling.
See our Whirlpool repair page.
GE
Many GE fridges with digital controls can be turned off from the panel, which stops cooling while lights stay on. If your display shows “Off” or a dash, check the manual to turn cooling back on. GE side-by-side and French-door models commonly have evaporator fan and defrost issues similar to other brands.
Kenmore
Kenmore fridges have been made by several manufacturers. The model number usually indicates which, and that determines the error codes and modes. Check the model number on the label inside the fridge, and use the corresponding manual.
Bosch and Miele
These fridges often have detailed displays with alarms for door open and high temperature. Check for a vacation or holiday mode, which changes how the fridge compartment is cooled, and confirm the temperature settings. Always check the manual for codes.
What Codes Usually Mean
| Code type | What to do |
|---|---|
| Power outage (PF, PO) | Clear it, check food temperatures, monitor |
| High temperature (H, HI) | Check door seals, settings, coils; wait 24 hours after reloading |
| Fan codes | Often ice; manual defrost; if repeated, defrost system |
| Sensor or heater codes | Defrost system or sensor; needs testing |
| Communication codes | Power reset; if repeated, wiring or boards |
When to Call a Pro
If a code keeps returning after a reset or manual defrost, or your fridge isn’t cooling and no mode or setting explains it, call us. We diagnose fans, sensors, defrost components and control boards on all major brands.
See our refrigerator repair service.
Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call is waived when you go ahead with the repair, and our repairs carry a 3 to 6 month warranty depending on the job. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our 350+ Google reviews.
Frequently Asked Questions
Why does my Samsung fridge display OF OF?
OF OF commonly indicates demo mode, where the fridge doesn’t cool. On many models, press and hold the top two left buttons together for about 5 to 8 seconds to exit. Check your manual.
What does Er FF mean on an LG fridge?
Er FF commonly indicates a freezer fan problem, often caused by ice around the fan. A manual defrost may help, but if it returns, the defrost system should be tested.
What does PF mean on a Frigidaire fridge?
PF commonly indicates a power failure occurred. Clear the alert, check that food stayed cold, and monitor the temperature.
Why is my fridge light on but it’s not cooling?
Check whether the fridge is in demo, showroom or cooling-off mode. Otherwise, check the settings, coils, fans and defrost system.