Quick answer
What do 5C, SC and 4C mean on a Samsung washer?
5C (5E on older models) and SC mean the washer can't drain, usually from a clogged debris filter or kinked drain hose. 4C (4E) means not enough water is coming in, so check that the taps are open and the inlet hoses and screens are clear.
Samsung washers use short codes to report water problems. The three people search for most are 5C (drain), SC (usually also read as drain) and 4C (water supply). Older models show 5E and 4E for the same faults. Here’s what each one means and how to fix it.
Safety First
Unplug the washer before you open the filter door or disconnect hoses. Turn off the water taps before removing inlet hoses. Expect water and keep towels and a shallow pan nearby.
The Codes at a Glance
| Code | Meaning | Most common fix |
|---|---|---|
| 5C / 5E | Drain error: water isn’t draining properly | Clean the pump filter, check the drain hose |
| SC | Generally read as the same drain error as 5C (confirm in your manual) | Same as 5C |
| 4C / 4E | Water supply error: not enough water is coming in | Open taps, check hoses and inlet screens |
Why SC? On some displays, “5C” can look like “SC” because of how the digits are drawn. Your manual will confirm what your specific model shows.
Fixing 5C, 5E or SC (Drain)
1. Check the drain hose
- Pull the washer out and look for kinks or crushing behind it.
- Samsung recommends the drain hose be at least 18 inches high, inserted 6 to 8 inches into the standpipe, and not extended. An extension or a hose pushed in too deep can cause drain errors.
- Check that the standpipe or laundry sink drains freely.
- In cold weather, make sure the hose isn’t frozen.
2. Clean the drain pump filter
On most Samsung front-loaders, the filter is behind a small door at the bottom front.
- Unplug the washer and place a pan and towels under the filter door.
- Open the door. If there’s an emergency drain tube, pull it out, remove the cap, and let water drain into the pan. Repeat until it stops.
- Turn the filter counter-clockwise slowly to remove it.
- Clean out lint, coins, hair and small items. Rinse the filter.
- Check that nothing is stuck in the opening and the pump impeller turns.
- Reinstall the filter firmly and close the drain tube cap.
3. Check for suds
Too much detergent can cause drain problems. Samsung washers may show Sud when suds are detected. Use only HE detergent in the correct amount.
4. Test
Plug the washer in and run Drain/Spin. If water drains and the code doesn’t return, the problem is fixed.
Fixing 4C or 4E (Water Supply)
- Check the taps. Both hot and cold supply valves should be fully open.
- Check the inlet hoses for kinks or crushing behind the washer.
- Check the inlet screens. Turn off the taps, disconnect the hoses at the back of the washer, and inspect the small mesh screens. Clean sediment gently with a soft brush.
- Check water pressure. If other taps in the house are weak, the supply is the issue.
- Frozen lines. In unheated laundry spaces, check for frozen hoses or pipes in winter.
- Detergent drawer. On some models, a clogged detergent drawer can affect water flow. Remove and clean it.
Reconnect the hoses firmly, open the taps, and check for leaks before running a test cycle.
Other Samsung Washer Codes
| Code | Meaning |
|---|---|
| dC / dE | Door problem: not closed or not locking |
| 3C / 3E | Motor problem |
| Sud | Excess suds detected |
For general drain and spin issues on any brand, read our guide to a washer not draining or spinning.
Preventing Repeat Drain and Fill Errors
- Check pockets before washing. Coins, hair ties and tissues are the usual filter cloggers.
- Wash small items like socks and baby clothes in a mesh bag.
- Clean the pump filter every few months, more often if you wash pet bedding.
- Leave enough space behind the washer so hoses aren’t crushed.
- Replace rubber inlet hoses that look cracked or bulging.
How to Reset a Samsung Washer
Once the cause is fixed, press Power to turn the washer off, unplug it for a minute or two, then plug it back in and start a new cycle. If the code returns, the underlying problem is still there.
When to Call a Pro
Call a technician if 5C or SC returns after you’ve cleaned the filter and checked the hose, the pump hums or makes no sound during drain, 4C persists even with good water pressure and clean screens, or you see 3C (motor). These can point to a failed drain pump, inlet valve, pressure sensor or control.
See our Samsung appliance repair page and our washer repair service.
Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call is waived when you go ahead with the repair, and our repairs carry a 3 to 6 month warranty depending on the job. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our 350+ Google reviews.
Frequently Asked Questions
What does 5C mean on a Samsung washer?
5C (or 5E on older models) means a drain error. The washer isn’t draining properly, usually because of a clogged pump filter or a kinked or badly positioned drain hose.
Is SC the same as 5C on a Samsung washer?
SC is generally read as the same drain error as 5C, partly because the digits look alike on the display. Confirm in your manual for your specific model.
What does 4C mean on a Samsung washer?
4C (or 4E) means a water supply problem. Open the taps fully, check the inlet hoses for kinks, and clean the inlet screens.
How do I clear a 5C code on my Samsung washer?
Unplug the washer, clean the drain pump filter, check the drain hose, then plug it back in and run Drain/Spin. If it drains properly, the code clears.