Quick answer
How often should I run Samsung Self Clean or LG Tub Clean?
About once a month, or every 30 to 40 washes, with the drum empty. Run it more often if the washer smells or you use cold cycles a lot, and leave the door open between washes.
Most modern Samsung and LG washers have a built-in cleaning cycle. Samsung calls it Self Clean (or Self Clean+ on some models), and LG calls it Tub Clean. These cycles use hot water and extra agitation to clear detergent residue, softener build-up and the grime that causes musty smells. Used regularly, they’re one of the easiest ways to keep a washer fresh.
Why Washers Need Cleaning
HE washers use small amounts of water. Detergent and fabric softener residue, body oils and lint can collect in the drum, gasket, detergent drawer and hidden parts of the tub. Add moisture left inside after a wash, and you get odour, black spots on the gasket and residue on clothes.
Signs Your Washer Needs Cleaning
- A musty or sour smell from the drum, especially when the door is first opened.
- Black or grey spots on the door gasket.
- Grey streaks, flecks or a greasy film on clean clothes.
- Slimy residue in the detergent drawer.
- Towels that smell even after washing.
If you notice any of these, run a cleaning cycle and clean the gasket and drawer by hand. Then follow the habits below to stop it coming back. For a deeper clean of a front-loader, including the gasket and filter, a hands-on approach works better than the cycle alone.
How Often to Run the Cycle
Many manufacturers suggest running a cleaning cycle about once a month. Both Samsung and LG models can remind you: some Samsung washers flash a Self Clean reminder, and some LG washers display tCL when a Tub Clean is due. Follow the reminder, or set your own monthly schedule if your model doesn’t show one.
How to Run Samsung Self Clean
- Empty the drum. No clothes or towels.
- Check your manual about cleaning products. Some Samsung models are designed to run Self Clean with nothing added; others allow a washer cleaner or bleach in a specific compartment. Don’t mix products.
- Select Self Clean (or Self Clean+) on the control panel. On some models it’s a dedicated button; on others it’s a cycle on the dial.
- Press Start. The cycle takes a while, so plan for it.
- When it finishes, wipe the drum and door gasket, and leave the door open to dry.
How to Run LG Tub Clean
- Empty the drum.
- Add a cleaner if your manual allows it. Many LG manuals say you can add a washer tub cleaner, or liquid chlorine bleach to the maximum line of the bleach dispenser. Don’t use detergent.
- Select Tub Clean from the cycle options or button.
- Press Start.
- After the cycle, leave the door open so the drum can dry.
Comparison
| Samsung Self Clean | LG Tub Clean | |
|---|---|---|
| Purpose | Removes residue, reduces odours | Removes residue, reduces odours |
| Frequency | About monthly, or when reminded | About monthly, or when tCL appears |
| Load | Empty drum | Empty drum |
| Cleaning products | Depends on model; check manual | Washer cleaner or bleach as manual allows |
| After the cycle | Wipe gasket, leave door open | Leave door open to dry |
The Cycle Isn’t Everything
A cleaning cycle helps, but some parts need hands-on attention:
Door gasket
Pull back the rubber gasket on front-loaders and wipe out hair, lint, coins and slime. A cloth with warm water and a little mild cleaner works well. Dry it afterward.
Detergent drawer
Pull out the drawer, rinse it under warm water, and clean the cavity it sits in. Softener residue builds up here.
Drain pump filter
On front-loaders, clean the pump filter periodically. Debris here can cause drain problems and odours. Our LG OE code guide and Samsung 5C guide show how.
Leave the door and drawer open
After every wash, leave the door and detergent drawer slightly open so moisture can escape.
Habits That Reduce Build-Up
- Use only HE detergent, measured carefully. More detergent doesn’t mean cleaner clothes.
- Use less fabric softener, or skip it on towels.
- Remove wet laundry promptly.
- Run a hot wash occasionally if your fabrics allow it.
When to Call a Pro
If your washer still smells after cleaning cycles, shows drain codes, leaks, or leaves residue on clothes even with correct detergent, there may be a blockage, a failing pump, or build-up in places a cycle can’t reach. A technician can check the drain system, gasket and hoses.
See our washer repair service, and our Samsung and LG repair pages.
Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call is waived when you go ahead with the repair, and our repairs carry a 3 to 6 month warranty depending on the job. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our 350+ Google reviews.
Frequently Asked Questions
How often should I run Samsung Self Clean?
Many manufacturers recommend about once a month. Some Samsung washers show a reminder when a Self Clean is due.
Can I use bleach in LG Tub Clean?
Many LG manuals allow liquid chlorine bleach up to the maximum line of the bleach dispenser, or a washer tub cleaner. Check your manual and don’t mix products.
What does tCL mean on an LG washer?
tCL is a reminder that it’s time to run the Tub Clean cycle. It’s not a fault code.
Why does my washer still smell after a cleaning cycle?
Odour often comes from the door gasket, detergent drawer or drain pump filter, which need cleaning by hand. Leaving the door open between washes also helps.