Quick answer
What does tE1 mean on an LG dryer?
tE1 means the dryer’s temperature sensor (thermistor) circuit is reading open or shorted, so the dryer stops heating. Clean the lint filter and vent, then unplug the dryer for 5 minutes. If the code comes back, the thermistor or its wiring needs testing and usually replacing.
A tE1 code on an LG dryer means there’s a problem with the temperature sensor, called a thermistor. The dryer’s control board reads this sensor to keep the drum air at the right temperature. If the reading is impossible (the circuit is open or shorted) the board stops heating and shows tE1. You may see tE2 or tE3 on some models for similar sensor faults. The dryer may tumble but stay cold, or stop altogether.
Safety First
LG electric dryers run on 240 V. Unplug the dryer before you pull it out, touch the vent or open any panel. Don’t open the cabinet with the dryer plugged in.
Step 1: Clean the Lint Filter and Lint Trap Housing
- Pull out the lint filter and clear it.
- Wash it in warm soapy water if dryer sheets have left a waxy film. Hold it under the tap: water should pass through the mesh.
- Vacuum the slot the filter slides into, using a narrow attachment.
A clogged filter traps heat around the sensor and can confuse the readings.
Step 2: Check the Vent
- Unplug the dryer and pull it out gently.
- Check that the vent duct isn’t crushed or kinked behind the dryer.
- Go outside and check the vent hood. The flap should open freely when the dryer runs.
- If the duct is long or hasn’t been cleaned in a year, clean it. See our guide on how to clean a dryer vent.
Step 3: Reset the Dryer
- Unplug the dryer, or switch off its double breaker, for 5 minutes.
- Plug it back in and run a Timed Dry on High for 10 minutes.
- Check for heat at the drum and see if the code comes back.
What If the tE1 Code Keeps Coming Back?
If the lint path and vent are clear and tE1 returns, the sensor circuit needs testing:
- Thermistor. The sensor is usually near the heater outlet or the blower housing. A failed thermistor reads open or shorted and is a common LG replacement.
- Wiring and connectors. Heat makes plastic connectors brittle, and wires can come loose from the sensor or the board.
- Control board. Less often, the board itself misreads a good sensor.
A technician measures the thermistor’s resistance at room temperature and compares it with LG’s specification, then checks the wiring back to the board.
Other LG Dryer Codes You Might See
| Code | Meaning | First step |
|---|---|---|
| d80 / d90 / d95 | Vent restricted (80%, 90%, 95%) | Clean the lint filter and the vent |
| nP | No power at the heater | Reset the double breaker fully off and on |
| tE2 / tE3 | Other temperature sensor faults | Clean the vent, reset, then call |
| PS | Power supply problem | Check the cord and outlet; call |
For vent codes, see our guide to the LG dryer d80, d90 and d95 codes, and for a dryer that runs cold, our post on a dryer not heating. LG’s dryer error code list has more detail by model.
When to Call a Pro
Call a technician if tE1 returns after cleaning and a reset, if the dryer smells hot or burnt, or if it heats unevenly. Running a dryer with a faulty temperature sensor isn’t safe.
See our LG appliance repair page and our dryer repair service.
Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call (plus HST) is waived when you go ahead with the repair, and if a part has to be ordered, the return visit is free. Warranty depends on the part and the manufacturer. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our Google reviews.
Frequently Asked Questions
What does tE1 mean on an LG dryer?
tE1 means the dryer’s temperature sensor (thermistor) circuit is reading open or shorted, so the dryer stops heating. Clean the lint filter and vent, then unplug the dryer for 5 minutes. If the code comes back, the thermistor or its wiring needs testing and usually replacing.
Can a clogged vent cause tE1?
It can contribute. Trapped heat stresses the sensor and its wiring. Clean the vent first, but a repeat tE1 usually means the sensor has failed.
How do I reset tE1 on my LG dryer?
Unplug the dryer, or switch off its double breaker, for 5 minutes. Then plug it back in and run Timed Dry on High.
Is it safe to use my LG dryer with a tE1 code?
No. The dryer can’t control its temperature properly. Stop using it until the sensor has been checked.