Samsung Washer Error Codes: Complete List, Meanings & Troubleshooting Guide

Samsung Washer Error Codes: Complete List, Meanings & Troubleshooting Guide

Quick answer

What are the most common Samsung washer error codes?

The most common are 4C (not enough water), 5C or SC (not draining), UE (unbalanced load), dC (door not locking) and 3C (motor). Most of them can be cleared by fixing the cause and unplugging the washer for 5 to 10 minutes.

Samsung washers show a short code on the display when something goes wrong. Most codes point to one of five things: water coming in, water going out, an unbalanced load, the door lock or the motor. This guide lists the common Samsung washer error codes, what each one means and what you can try before calling for repair. Codes can vary a little between front-load and top-load models and between model years, so check your manual if your code isn’t listed.

Safety First

Unplug the washer before you open the debris filter, remove hoses or move the machine. Expect water when you open the filter on a front-loader: have towels and a shallow pan ready.

Samsung Washer Error Codes Chart

CodeMeaningFirst step
4C / 4ENot enough water coming inOpen both taps fully, straighten the hoses, clean the inlet screens
5C / 5E / SCWater isn’t drainingClean the debris filter, check the drain hose for kinks
UE / UB / UbUnbalanced loadRedistribute the load and level the washer
dC / dE / dS / dLDoor or lid not closed or not lockingClose the door firmly, clear the gasket, reset
3C / 3EMotor problemLighten the load, check the drum turns, reset
LC / LEWater leak detected or water level problemCheck for leaks underneath and reduce detergent
HC / HEHeater or water temperature problemRun a cold cycle and reset; call if it returns
Sd / SUDToo many sudsUse less HE detergent; the washer will wait for suds to clear
1C / 1EWater level sensor problemReset; a technician should test the sensor
OC / OEOverflow or too much waterTurn off the taps and call; the inlet valve may be stuck open

Water Supply Codes: 4C and 4E

The washer tried to fill and didn’t get enough water in time. Check that both taps are fully open, the hoses aren’t kinked and the small filter screens at the back are clean. Full steps are in our Samsung washer 4C error code guide.

Drain Codes: 5C, 5E and SC

Water isn’t leaving the drum fast enough. The usual cause is a clogged debris filter behind the small door at the bottom front. Clean it, check the drain hose and make sure the standpipe isn’t blocked. See our guide to Samsung SC, 4C and 5C codes.

Balance Codes: UE and UB

The load is off balance, so the washer won’t spin at full speed. Spread the clothes evenly, add a towel or two to single heavy items, and level the washer. If it happens with tiny loads, the shocks or springs are probably worn. Read our Samsung washer UE guide.

Door Codes: dC, dE and dS

The washer can’t confirm the door is closed and locked. Close it firmly, check the gasket for trapped clothing and look at the door hook. If you never hear the lock click, the lock has likely failed. See our Samsung washer dC guide.

Motor Codes: 3C and 3E

The motor isn’t responding as expected. Take out half the load, check that the drum turns freely by hand with the washer unplugged and reset the washer for 5 to 10 minutes. Our Samsung washer 3C guide explains what to check next.

How to Reset a Samsung Washer

  1. Press Power to turn the washer off.
  2. Unplug it, or switch off its breaker, for 5 to 10 minutes.
  3. Plug it back in and run a short Rinse+Spin cycle.

A reset clears the display, but if the cause is still there, the code will come back. Fix the cause first.

Keep Codes Away

  • Clean the debris filter every month or two.
  • Use HE detergent and measure it. Too much soap causes suds, drain and motor codes.
  • Run a Self Clean cycle monthly. See our guide to Samsung Self Clean and LG Tub Clean.
  • Don’t overload the drum, and wash bulky items on their own cycle.
  • Replace rubber inlet hoses every five years or so.

Samsung publishes its own washer error code guide if you want to check codes by model.

When to Call a Pro

Call a technician if a code comes back after you’ve done the basic checks and a reset, if water is leaking, if the door is stuck locked with water inside, or if you smell burning. Codes like OC, HC, 1C and repeat 3C usually need parts tested inside the washer.

See our Samsung appliance repair page and our washer repair service. For other brands, see our LG washer OE code and Whirlpool washer error codes guides.

Book a repair: call 437-662-1414 or book a visit online. We’re open 7 AM to 11 PM every day, statutory holidays included, at the same price, and we serve Toronto, North York, Scarborough and Etobicoke. The $70 service call (plus HST) is waived when you go ahead with the repair, and if a part has to be ordered, the return visit is free. Warranty depends on the part and the manufacturer. We’ve been fixing appliances since 2004 with licensed, insured and certified technicians. Read our Google reviews.

Frequently Asked Questions

What are the most common Samsung washer error codes?

The most common are 4C (not enough water), 5C or SC (not draining), UE (unbalanced load), dC (door not locking) and 3C (motor). Most of them can be cleared by fixing the cause and unplugging the washer for 5 to 10 minutes.

How do I clear an error code on my Samsung washer?

Fix the cause first, then unplug the washer or switch off its breaker for 5 to 10 minutes. Plug it back in and run Rinse+Spin.

Why does my Samsung washer show a different code than the manual?

Samsung changed its codes over the years. Older models use an E at the end (4E, 5E, 3E) and newer ones use C (4C, 5C, 3C). They mean the same thing.

Should I keep using my washer if a code keeps coming back?

No. A repeat code means something still needs fixing. Running the washer anyway can cause leaks or damage the motor or board.